Mains Operation; Assembly (Figure A); Power Supply (Figure B) - NUK LUNA Instrucciones De Uso

Mipu LUNA Cluster 2.book Seite 9 Freitag, 17. Mai 2013 3:18 15
1. Insert valve 2 in breast shield 3 with
the knob pointing upwards.
2. Put motor unit 13 on breast shield 3.
3. Screw connection ring 4 onto motor
unit 13 from underneath.
4. Insert lip valve 5 into assembled breast
shield 3 from underneath.

7.1 Mains operation

Only use the mains adapter supplied for
n.
mains operatio
1. Open the battery compartment at
catch 16.
2. Insert plug 12 of mains
adapter 19 in the socket
in the battery
compartment.
3. Close the battery compartment:
push the two "hooks" of
the lid into the relevant
openings in the motor
unit and then close the
lid so that catch 16
engages audibly.
The device may
Note:
not be operated without the battery
compartment lid.
4. Plug the interchangeable plug 20
suitable for your power supply onto
the mains adapter. You can find out
which plug is suitable for your country
from the section which follows.
5. Plug mains adapter 19 into a wall
socket.
6. Assembly
5. Screw assembled motor unit 13 and
6. If desired, put the silicone cushion on
7. Power supply
7.2 Interchangeable plugs
The mains adapter is supplied with an EU
plug. Additional interchangeable plugs are
also included. You can use these to operate
your breast pump when abroad as follows:
Changing the plug
1. Using an item such as a
2. Slide the plug about
9
(Figure A)
breast milk container 6 together.
the breast shield and press on firmly.
Note: Make sure that the silicone
cushion fits closely to the breast shield
as the pump can otherwise draw in air,
which will prevent it from working
properly.
(Figure B)
Commonwealth,
Asia, Great Britain, Middle
East etc.
Australia, New Zealand,
China
Europe, South America,
Africa etc.
North, Central and South
America,
East Asia etc.
ball-point pen, press on
the release catch on the
plug.
1.5 cm upwards at
the same time, and
then take it off
towards you.
Africa,
Japan, South