i-tec SLPA90W Manual De Instrucciones página 4

EN
INTRODUCTION
This universal power adapter with 90 W output is an ideal choice for the power supply of
almost any notebook or other equipment requiring the voltage in DC 5 – 20V range. Output
voltage is set automatically by tips – see on table bellow. Every tip is marked and it has
acquired many patents and certificates already. Power adapter supplies devices with max.
current consumption 5A. This adapter features also additional USB port of A type (voltage:
DC 5V, maximum power consumption: 1 A) which can be easily used to power most of the
equipment with USB power pack (e.g. MP3 players, Bluetooth hands-free, digital frames,
some mobile phones, car navigation units, etc.). This adapter supplies devices with max
90W power input (85 W for connector, 5 W for USB port).
The internal contact polarity is
make sure that your equipment requires the same polarity connection as the adapter.
SPECIFICATIONS
• Rated input voltage AC 100–240 V, 50–60 Hz, max. 2 A
• Outpout power (max.): 90 W (85 W for connector, 5 W for USB port)
• Efficiency: more then 86%
• Output voltage: DC 15–20 V (DC 15V/16V/18.5V/19V/19.5V/20V) it depends on
connected tip, for USB port max. DC 5.25 V
• Output current for DC 15–20 V: max. 5 A
• Output current for DC 5 V USB type A: max. 1 A
• Over voltage protection, overheating protection, input internal fuse protection,
current limit protection, output short circuit protection, open circuit protection
• Anti-static safety design. Strong fire proof protection case design
• Using: operating temperature 0–40°C, related huminidy 20–80 %
• Dimensions: 135 x 68 x 18 mm
• Weight of adapter: 260 g
APPLICATION
Note 1: Before connecting the adapter to your equipment for the first time check the
requirement of the equipment for input voltage and power (the adapter's maximum output
is 90W). This information can usually be found on the label with technical description on
the notebook bottom or in the manual to your equipment. If you set the voltage to a wrong
value this may cause damage to your equipment, fire or bodily injury. If you are not sure
about the voltage value it is recommended to contact the manufacturer.
Note 2: In preference AC adapter is determined for supply of notebooks; but it is also
available for supply most of devices with USB supply by USB port (e.g. MP3 players,
Bluetooth hands-free, digital frames, some mobile phones, car navigation units, tablets –
e.g. Asus, Toshiba, GoClever, Prestigio, Emgeton, Sencor etc.).
Step 1: Universal adapter voltage setting
Connect the adapter to power supply by power cable (pic. A).
Step 2: Connector fitting and automatical voltage setting
Choose the connector according to the table. The connector type can be easily tested if
inserted into the power socket of your equipment. (The connector can be easily inserted so
that it is securely fitted in the socket.) Avoid applying force to insert the connector. Choose
4
Quick Start / Ultra Slim Power Adapter
. Before connecting the adapter check to