3.3 - Safety System
The Milk Shake Mixer model BMS, has a safety system that does not allow
motor to be turned ON without the Cup. (See Pic. 03 and Pic. 04).
PICTURE - 03
MACHINE DOES NOT
TURN .
3.4 CLEANING
The Milk Shake Mixer parts are resistant to corrosion, hygienic and easily
cleaned.
Before using them for the first time and after each use, clean the Cup with warm
clean water and neutral soap, wipe and dry them well. To clean the agitador, it is
recommended to fill around 250ml of water in the Cup (second mark) and turn on the
mixer for a few seconds. All other parts of the BMS must be cleaned with a wet cloth.
DO NOT WASH ANY PART IN A DISH WASHER.
Revise all the parts frequently before assembling them again.
Use only original SIEMSEN spare parts which are available at the Authorized
Dealer.
THE USAGE OF DAMAGED OR NOT RECOMMEND SPARE PARTS MAY
CAUSE SERIOUS PERSONAL HURTS OR DAMAGES TO YOUR MILK SHAKE
MIXER. NEVER DIP THE MOTOR HOUSING IN WATER OR ANY OTHER LIQUID. ALL
MAINTENANCE MUST BE DONE BY AUTHORIZED TECHNICAL ASSISTANT.
PICTURE - 04
MACHINE TURNS .
05