Hardware Installation; Software Installation - i-tec USB3STADA Manual De Instrucciones

EN
INTRODUCTION
i-tec USB 3.0 to SATA III Adapter implements a bridge between a USB
3.0/USB 2.0 port and SATA mass storage device. With this adapter can
be easily connected 3,5" and 2,5" HDD, optical drives BLU-RAY/DVD/
CD and other drives with SATA III interface (max. 6Gbps) to a computer
with USB port. The interface USB 3.0 SuperSpeed allows users fast and
easy file transfer, backing up files, or storing large file archives on hard
drives. Easy installation with Plug & Play support.

HARDWARE INSTALLATION

• Plug the SATA connector of the device into SATA port of the
adapter. Then plug USB connector of the adapter into available
USB 3.0 (up to 5 Gbps) / USB 2.0 (up to 480 Mbps) port of your
PC. Make sure the correct connection.
• Plug the AC power adapter into the power outlet and the other
end into the appropriate adapter slot.
• The adapter does not have any switch button. Device starts
working right after connection and automatic installation of the
adapter.

SOFTWARE INSTALLATION

OS Windows 7 / 8 / 8.1 / 10 (32 / 64bit), macOS 9.0 and higher
AFTER CONNECTING
• Device is supported by operating system and you do not need to
install drivers.
• LED indicates power (shine) and activity (flashing), if the device
is connected.
6
Quick Start / Bluetooth Comfort Optical Mouse