ECOFOREST HIDROCOPPER Manual De Usuario página 23

1-7a Adjust air
Way:
If you press increase (
1-7a Adjust air
Way:
If you press increase (
CAUTION, ECOFOREST DOES NOT CONSIDER MODE 3 AS BEING AN EMERGENCY SETTING, ASK YOUR
DISTRIBUTOR BEFORE USING MODE 3!
1-7a Adjust air
Way:
)
Press MENU (
1-7b Test contr.
hardware
)
Press MENU (
1-7c Keyboard
sound
If you push the MENU key (), you will return to section 1-7 Programming several uses. If you push it again
or if you do not touch anything it will return to the main screen. Only for water models. Press the increase button

( ).
1-8 Programming
T. °C water
1-8 Programming
T. °C water
Press the On-Off button (
reach point 1-9.
This is the air value by default. Combustion air is automatically adjusted
depending on power level at any time.
In this mode, the fuel quantity corresponding to every level is automatically
adjusted (changing the endless motor's time) by taking gas outlet temperature
1
as a reference and Redding air combustion in order to maintain the desired
temperature level; though quality or heating power of the pellets may change.
)
:
In mode 2 air is adjusted the same way as in mode, but fuel quantity
corresponding to every level does not change (it does not provoke changes to
2
the endless motor time).

):
Mode 3-Combustion air setting through motor-extractor voltage. The values of
rotation of the extractor can be changed according to the need of each user or
to the installation (see point 1-6b).
Every level of fuel is directly linked to the rotation of the extractor and those
3
values are set at manufacture, by default.
CAUTION! This is an EMERGENCY Mode because those are manual
combustion air settings.
:
This test is used to disable Motors checking made by the C.P.U. when
connected for the first time and each time it gets off; it is activated at
YES
manufacture. (To complete this process, the stove shall be disconnected).
:
As indicated, this screen enables or disables the sound of the keyboard
everytime you press a key.
NO
If you press On (
this button again or remain inactive, you get back to the main screen.
This is the temperature setting menu. That is, this screen allows you to set up
the temperature of water at which the boiler shall operate. Press MENU (
_ _ °C
This screen displays the water temperature by default; that is 65°C; change
this value by pressing increase or decrease, between 40°C and 75°C.
65°C

) to reach point 1-8 water temperature programming. Press increase (

) you get back to point 1-7 Multiple use setting. If you press
22
).

) to