Olympus S-DVD-100 Manual Del Usuario página 45

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PC mode
Problem
The PC does not
The unit or the external device is not
identify the unit or
properly connected.
a device
The Dock&Done mode/PC mode switch is
connected to it via
set to the Dock&Done mode position.
the unit.
The unit is in Dock&Done mode, not in PC
mode.
The PC's OS or other software is not
supported.
The PC does not
The disk has become contaminated with dirt
recognize the disk
or has scratches, or is not correctly set in the
in the unit.
tray.
An incompatible disk is inserted.
A disk with an incompatible format is
inserted.
Data that has been
The digital camera date has not been set.
stored in
Dock&Done
mode is not found.
Cause/Status
Troubleshooting
Solution
Check to see if the USB cable is firmly
connected.
Set to the PC mode, making sure that
the PC mode indicator turns on.
Let the unit finish its current operation
in Dock&Done mode with the Dock&
Done mode/PC mode switch set to on
the PC mode position, then wait until
the PC mode indicator turns on.
Check to see if the unit supports the
PC's OS and other software.
Check that the disk is not contaminated
by dirt, or that it does not have any
scratches. Then, correctly insert the
disk. Make sure the ACCESS indicator
illuminates and goes off.
Insert a disk compatible with the unit.
Use a disk which has been formatted
with the "Dock&Done" mode format
function or a disk formatted in UDF1.5
format using the included B's CLiP6
software.
If you do not set the date, the data may
be stored in the default folder of the
digital camera. Check the folder.
Check the digital camera date before
shooting images.
EN-45
Tabla de contenido
loading

Tabla de contenido