Menu Options - Velleman CCTVPROM7 Manual Del Usuario

Juego de videovigilancia multifunción
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

7.3 Menu options

Following menu options are available:
HDD – Record – PlayBack – Motion – PTZ – PTZCtrl – Log – System
HDD
Record
14/07/2010
CCTVPROM7
• Select 'Overwrite' (X) to automatically overwrite the oldest data
when the disk is full. Deselect (empty) to disable this function.
• The status and capacity of the hard disk are shown.
• Select OK to save and exit, select CANCEL to leave the hard disk
menu without making changes.
• Select FORMAT to clear all data on the hard disk. A warning is
displayed that all data will be lost. Press OK to continue or CANCEL
to exit.
Note: format will not work when the DVR is recording.
There are 3 submenus under the record menu.
• Select the channel to set-up.
• When desired, customize the channels name (up to 8
characters).
• Set the channel quality: lowest, low, middle, high or
highest.
• Set the number of frames per second: 1, 3, 5, 8, 13 or
25.
• Set the brightness, contrast and saturation: 0~99
(default = 50).
• Click on 'APPLY TO' to apply the setting to the indicated
channel. Select a different channel to apply the same
settings to that channel.
• When finished, click OK to save or CANCEL to exit
without saving.
• Select the channel for which to schedule continuous
recording.
• The grid is divided into 24 hours (horizontal) and 7 week
days (vertical). E.g. when the 4
row is selected (red) than the indicated channel will be
recorded continuously every Tuesday from 3AM until
4AM.
• Click on 'APPLY TO' to apply the setting to the indicated
channel. Select a different channel to apply the same
settings to that channel.
• When finished, click OK to save or CANCEL to exit
without saving.
• Set the status of a channel to 'X' to manually start recording the
images of that channel. Set to 'empty' to stop recording
manually. During recording, a red dot is shown at the bottom of
the channel.
• Note that manual recording will not start when the hard disk is
full or not present or not formatted.
• When finished, click OK to save or CANCEL to exit without
saving.
6
th
square on the second
©Velleman nv
Tabla de contenido
loading

Tabla de contenido