Playing Compact Disc - lauson CL136 Manual De Instrucciones

THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER

BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
YOU CAN OVERWRITE A PRESET STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.

FM & FM-STEREO RECEPTION
PRESS THE " FM-ST/MONO " BUTTON (21)REPEATEDLY, THE FM PROGRAMS ARE RECEIVING IN MONO

AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS
PREFERABLE TO RECEIVE THE PROGRAM IN MONO.
IF STEREO SIGNAL IS BEING RECEIVED, THE "ST" INDICATOR "

(2) TO SHOW FM STEREO PROGRAM IS NOW RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILD-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHT ROTATE
OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA (35) HANGING AT THE REAR CABINET. THIS
WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR THE BEST RECEPTION.

PLAYING COMPACT DISC

GETTING START

1. PRESS FUNCTION BUTTON (12) TO SELECT " CD " MODE.
2. PRESS "CD TRAY OPEN/CLOSE" BUTTON (3) TO OPEN THE CD TRAY (4).
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE IT BY CD TRAY
OPEN/CLOSE BUTTON(3).
4. FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF TRACKS &
TOTAL PLAYING TIME.
PLAY / PAUSE MODE

1. PRESS THE "BAND/
2. TO INTERRUPT, PRESS THE "BAND/
FLASING ON THE LCD DISPLAY (2). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
STOP MODE

1. IF " STOP " BUTTON (19) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP
MODE.
SKIP MODE (SKIP UP

1. DURING PLAY OR PAUSE MODE, IF "SKIP UP
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF "SKIP DOWN
THE BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE
MODE.
3. AFTER STEP 2, PRESS "SKIP DOWN
REMAIN THE PLAY OR PAUSE MODE.
FOR MP3 DISC

1. AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND ABLUM WILL BE SHOWN
ON THE LCD DISPLAY (2).
2. PRESS " FOLDER/ PRE-UP " (14) TO SELECT THE ALBUM NUMBER.
3. PRESS " SKIP UP
4. WHEN THE DESIRED TRACK AND ALBUM IS BEING SELECTED, PRESS THE " BAND/
START PLAYBACK.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
PRESS THE " INFO " BUTTON UNTIL THE LCD DISPLAY (2) SHOW " FILE - ... "DURING PLAYBACK OF
MP3/WMA FILE, THE SONG TITLE / ARTIST NAME / ALBUM NAME IS BEING DISPLAYED IN SEQUENCE .
PRESS THE " INFO " BUTTON AGAIN TO DISABLE THE FUNCTION.
REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, " NO TITLE " OR " NO ARTIST " IS
BEING DISPLAYED" ON LCD DISPLAY (2).
- NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT
SUPPORTING BY THE SYSTEM.
- THE SYSTEM SUPPORT ONLY ENGLISH AND NUMERAL FOR ID3 FUNCTION
" BUTTON (17) TO START PLAYBACK, THE FIRST TRACK WILL START PLAYBACK.
" BUTTON (17) ONCE, AND THE PLAYING TIME WILL BE FREEZE &
/ SKIP DOWN
" BUTTON (20) AGAIN WILL GO TO THE PREVIOUS TRACK AND
" OR " SKIP DOWN
)
" BUTTON (18) IS PRESSED. IT WILL GO TO NEXT TRACK
" BUTTON (20) IS PRESSED. IT WILL GO BACK TO
" BUTTON (18/20) TO SELECT THE TRACK NUMBER.
GB-3
" WILL APPEAR ON LCD DISPLAY
" BUTTON (17) TO