JVC KD-AR5000 Manual De Instrucciones página 30

To select the font type used on the
display—Font Type
You can select either of the two fonts (1 or 2).
To turn the tag display on or off—Tag
An MP3 and WMA track can contain track
information called "Tag" where its album
name, performer, track title, etc. are recorded.
• On: Shows the Tag display while playing
MP3 or WMA tracks.
• Off: Cancels the Tag display. Only the
folder name and track name appear.
For MP3 tracks only: There are two versions–
ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag
version 2). When both ID3v1 and ID3v2 are
recorded, ID3v2 will be shown.
To select the audio level meter—Theme
You can select the level meter.
• To show the level meter, press DISP
repeatedly.
• Meter 1:
• Meter 2:
• Meter 3:
30
To show or delete the key icon
boundary on the touch panel—Key Info
Key icons have their own boundaries on the
touch panel to make the operations easy.
These boundaries can be shown or deleted
according to your preference.
• On: To show the key icon boundary.
• Off: To delete the key icon boundary.
Though "Off" is selected, the key icon boundary
will be shown while you are operating the touch
panel. About 5 seconds after the operation, it
goes off.
To change the FM tuner selectivity
—IF Filter
In some areas, adjacent stations may interfere
with each other. If this interference occurs,
noise may be heard.
• Auto: When this type of interference occurs,
this unit automatically increases the
tuner selectivity so that interference
noise will be reduced. (But the stereo
effect will also be lost.)
• Wide: Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
To change the voice support system
—VSS
You can select either "Beep" or "Voice" for the
voice support system (VSS).
• Voice: Guidance is announced in the
language you have selected (see "To
select the language for the VSS
—Language" on page 31) when you
operate the unit.
• Beep: A Beep sounds when you operate the
unit.
To deactivate the VSS, select "Off" for "VSS
Level" (see page 31).