Maintenance - SMASH 16 Manual De Instrucciones

MAINTENANCE

Before cleaning, inspecting or repairing your unit, make sure that engine has
stopped and is cool. Disconnect the spark plug to prevent accidental starting.
MAINTENANCE AFTER EACH USE
1
2
3
Lubrication
orifice
4.Others
Check for fuel leakage and loose fastenings and damage to major parts,
especially handle joints and guide bar mounting.
If any defects are found, make sure to have them repaired before operation
again.
1. Air filter
Dust on the cleaner surface can be removed by
tapping a corner of the cleaner against a hard surface.
To clean dirt in the meshes, split the cleaner into
halves and brush in gasoline. When using
compressed air, blow from the inside.
To assemble the cleaner halves, press the rim until it
clicks.
Lubrication
orifice
2. Oiling port
Dismount the guide bar and check the oiling port for
clogging. (
3. Guide bar
Sprocket
When the guide bar is dismounted, remove sawdust
teeth
in the bar groove and the oiling port.
Grease the nose sprocket from the feeding port on the
tip of the bar.
66