Stereo And Second Audio Program (Sap) - Insignia IS-TV040925 Manual Del Usuario

STEREO AND SECOND AUDIO PROGRAM (SAP)

The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Second
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
make certain that the word "STEREO" appears on the
screen. This means that "Stereo" broadcasting is available.
You can enjoy stereo sound from the left and right speakers.
• When the "MONO" broadcasting is received, no indication
is displayed.
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press the AUDIO SELECT button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
STABLE SOUND
When a loud sound is broadcast the stable sound feature assists in balancing the volume to a more comfortable listening
level.
1
Press the MENU button.
2
Press the SET + or – button until
the indicator next to "STABLE
SOUND" begins to flash.
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast, brightness and tint.
1
Press the MENU button.
2
Press the SET + or – button until the indicator next to
"PICTURE" begins to flash, then press the ENTER
button.
3
Press the ENTER button repeatedly to select the item
you want to adjust.
BRIGHTNESS CONTRAST
10
3T30631A [E] P08-11
MENU
CH SETUP
PICTURE
STABLE SOUND ON OFF
LANGUAGE
V-CHIP SET
COLOR TINT SHARPNESS
10
LISTENING TO SAP (SECOND AUDIO PROGRAM)
When the TV is turned on or a channel selection is made,
make certain that the letters "SAP" appear on the screen. This
means that the "Second Audio Program" broadcasting is
available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired
sound.
MONO+SAP BROADCASTING
MAIN SOUND
SAP SOUND
(MONO)
STEREO+SAP BROADCASTING
MAIN SOUND
(STEREO)
MAIN SOUND
(MONO)
3
Press the ENTER button to select ON or OFF.
4 Press the SET + or – button to adjust the setting.
+
increase brightness
BRIGHTNESS
increase contrast
CONTRAST
brilliant color
COLOR
greenish color
TINT
makes picture clearer
SHARPNESS
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on-screen.
2/21/05, 19:16
MAIN + SAP SOUND
(MONO)
SAP SOUND
MAIN + SAP SOUND
(MONO)
–
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer