Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Safety instructions / Operating instructions
• Do not overburden the saw and saw blade.
• Never use damaged saw blades.
• Use a saw blade that is appropriate for the work piece.
• Ensure that the saw blade and the grip are firmly seated.
• The saw blade must be aligned and centred within the frame.
• Tension the saw blade before use to achieve an exact and clean cut.
• Release the saw blade after use.
• The work piece should be as rectangular and straight as possible.
• Clamp the workpiece to the saw table (see Figs. 5a-c).
• Fasten the saw table to your workbench using the four pre-drilled holes.
• Wear the necessary protective gear, such as gloves and protective goggles.
• Never permit children to use the saw without supervision.
• This saw is not intended for commercial applications.
• Do not use the saw for any purpose other than the intended one.
Technical Data (Fig. 4a-d):
- Cutting width at 90°:
160 mm
- Cutting width at 45°:
105 mm
- Max. cutting height:
130 mm
r
a
r
d
t
a
t
b
r
b
t
c
Cleaning and Maintenance
After use, clean the mitre saw with a brush and
smear the saw blade with oil.
Maintenance
All components of the mitre saw are mainte-
nance-free.
Disposal
Dispose of the appliance through an approved
dis-posal centre or at your community waste fa-
cility. Observe the currently applicable regula-
tions. In case of doubt, please contact your wa-
ste disposal centre.
- Table length:
485 mm
- Blade length:
600 mm
- Blade width:
45 mm
y
y
- 6 -
r
c
y
a
b
Tabla de contenido
