Lenco DAR-012 Manual Del Usuario página 9

Ocultar thumbs Ver también para DAR-012:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

-
Preset Recall: station recall: Press the "P.SET" button to enter the "Preset recall" modus.
Turn the "TUNING" knob to select your favorite stored preset station and then press the
"TUNING". The selected station will be played.
Aux in function
Switch the unit on by pressing the "POWER" button.
-
Press the "FUNCTION" button until "AUX mode" is shown on the display.
-
Now you can play music from other music devices (MP3, CD player, Smartphone etc.)
connected to the RCA aux in connections on the back of the unit.
Bluetooth function
-
Press the "FUNCTION" button until "BT mode" is shown on the display.
-
If the Lenco DAR-012 has never been paired or cannot find the last paired device, the
display will show "UNCONNECT". This means the unit is in search mode. Please follow
the instructions below to pair your Bluetooth device with the Lenco DAR-012.
-
When pairing was successful, the display will show "CONNECTED".
-
By pressing the "PAIR/SCAN" button you can PLAY/PAUSE the song.
-
Turn the "TUNING" knob to play previous or next song.
-
Press and hold the "PAIR/SCAN" button for 3 seconds to pair with another Bluetooth
device
Notes: If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
Clock and Alarm Operation
-
If the radio is powered off, you can turn on the display light for a few seconds by pressing
any button.
Setting the alarm
-
Make sure the radio is turned off. Press and hold the "MENU" button until the hour
indicator starts to blink. You can set the hour by turning the "TUNING" knob and when
you have reached the desired hour time, press the "TUNING" knob to confirm. Now you
can set the minutes by turning the "TUNING" knob again and pressing the "TUNING"
knob to confirm.
After confirming the minutes you may set the alarm sound (BUZZER, DAB or FM) by turning
the "TUNING" knob and confirm by pressing the "TUNING" knob
When alarm is activated, press TUNING button as SNOOZE.
Alarm will nap for 9 minutes and reactivate again every time after pressing SNOOZE.
Alarm will repeat until off, maximum 6 times within 1 hour.
9
Tabla de contenido
loading

Tabla de contenido