Deleting An Image - Kodak SLIDE N SCAN Manual Del Usuario

You can also display the Slide Show on your television.
Please follow the steps in "VIEWING IMAGES ON A TV SCREEN", and then follow
the steps to engage the Slide Show feature.
Note: you will only be able to play back images that have been created with your
scanner. Images from other devices, such as mobile phones, will not be accessible
due to different file names and formats.

DELETING AN IMAGE

Note: Please back up images from your SD card to another device before
beginning this process. Once an item is deleted, it cannot be retrieved unless you
have stored it on another device.
1. In Playback Mode, use the arrow keys to select the picture you want to delete.
2. Press the Resolution/Delete
selected image.
3. To cancel deletion, select No when prompted.
Press the Resolution/Delete button two times to delete all captured images. This
will permanently delete all images on your SD card.
VIEWING IMAGES ON A TV SCREEN
1. Use the HDMI cable to connect your scanner to your TV's HDMI port.
2. Make sure your TV is set to the HDMI input setting. You may need to refer to
your TV's manual for this.
EN | 18
button only one time to delete the single
3. Please note that all menus and images will only show on your TV screen from
this point forward. The scanner's screen will not display them.
4. To preview an image, press your scanner's Home/Preview
5. With the scanner in Preview Mode, press the Playback
6. Use the Arrow buttons to scroll through your stored images.
7. Select your desired image and press the OK/Scan button.
8. Once an image is selected, you will see this icon
the screen.
9. Press the Playback button again to begin the Gallery slideshow.
10. The icon in the upper left corner of the screen will change to
slideshow will begin automatically in a few seconds.
11. To stop Slide Show Mode, press the OK/Scan button. You will return to the
Home Screen.
12. You may also be able to review your images at up to a 4K/2K image quality by
connecting your scanner to your TV via the USB setting, depending on the
maximum resolution of your TV.
Note: when 22 megapixel scanning is selected, the preview resolution on the TV
screen will reduce to 480P due to the transfer rate. The resolution of the scanned
images save in the SD card will remain at 22 megapixels with no reduction.
UPLOADING IMAGES TO YOUR COMPUTER
1. Use the Type-C USB Cable to connect the scanner to your computer's USB port.
2. Make sure your scanner and computer are both powered on.
3. From the scanner's Home Page, select the USB Upload
4. Press OK/Scan to complete the connection.
5. Find the Removable Disk on your computer (usually E: or F:).
6. Follow the prompts on your computer to upload the image files.
Note: if you are unable to connect, check to see that the SD Card is loaded
properly in its slot and try connecting the USB cable to a different USB port on your
button.
button.
in the upper left corner of
and the
Icon
19 | EN