Poulan 2750 Manual De Instrucciones página 7

Ocultar thumbs Ver también para 2750:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Cutters
Depth Gauge
_Drive Links _ "
7. Place thechain o ver and behind the
clutch, fitting the drive links inthe clutch
drum sprocket.
Adjusting
the tension:
Chah_ tension
is very
h-nportant.
Chain
stretches
during use. This is especially
true
during the first few times you use your saw.
Always
check
chain tension
each time you
use and refuel your saw.
You
can
adjust
the
chain
tension
by
loosening
the chain brake nuts and turning
the adjusting
screw
1/4 of a turn while lifting
up on the bar.
• If chain is too tight, turn adjusting screw 1/4
turn counterclockwise.
• If chain is too loose, turn adjusting
screw
1/4 turn clockwise.
Place chain onto the sprocket
8.
Fit bottom
of drive
links
between
the
teeth in the sprocket
in the nose of the
guide bar.
9.
Fit chain drive links in bar groove.
10. Pull the bar forward
until the chain
is
snug in the guide bar groove.
Ensure all
drive links are in the bar groove.
11. Now, install chain brake making sure the
adjusting
pin is positioned
in the lower
hole in the guide bar. Remember
this pin
moves the bar forward and backward
as
the screw
is turned.
12. Install chain brake nuts and finger tighten
only.
Once the chain is tensioned,
you
will need to tighten chain brake nuts.
CHAIN
TENSION
(Including
units
with
chain already
installed)
NOTE:
When
adjusting
chain
tension,
make
sure the chah_ brake nuts are finger
tight only.
Attempting
to tension
the chain
when
the chain
brake
nuts are tight
can
cause damage.
Checking
the tension:
Use the screwdriver
end of the chain adjust-
ment tool (bar tool) to move the chain around
the bar. if the chain does not rotate, it is too
tight. If too loose, the chain will sag below the
bar.
Chain Brake Nuts
Tool (Bar Tool)
Adjusting
screw
Chain
Brake Nuts
Adjusting
Screw
- 1/4 Turn
• Lift up the tip of the bar and tighten the
chain brake nuts securely
with the bar tool.
• Recheck
chain tension.
_
Cht_n Brake _IL
_.
_
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious
injury.
Tabla de contenido
loading

Este manual también es adecuado para:

277529003050

Tabla de contenido