Engine Operation; Before Starting; Fuel Feeding - TOHATSU M 25H Manual Del Propietário

ENGINE OPERATION

ENOM00042-0

Before starting

ENOW00022-B
CAUTION
Be sure to fill the engine before starting
engine. (To properly fill the engine with oil
follow the instructions. See page 28)
ENOW00027-C
CAUTION
Before starting engine for the first time
after reassembling engine or off-season
storage, disconnect stop switch lock and
crank approximately 10 times in order to
circulate the engine oil.
ENOM00044-E

1. Fuel feeding

ENOW00029-A
WARNING
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
1. Full open the air vent screw on the fuel
tank cap.
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly and
ENOF01710-0
release internal pressure completely.
After that, close the fuel tank.
3. Connect the fuel connector to the
engine and fuel tank.
1. Fuel connector
2. Pull
3. Insert
1
ENOF00027-A
3
1
ENOF01711-0
31
2
7
2