Brandt BFU662LNW Guia De Instalacion página 36

6. Once you have placed both appliances in the desired
place, make sure again that (pic. 4):
- the upper planes A coincide;
- there is a gap of 7 mm between appliances;
- the front planes B coincide when doors of both
appliances are open;
- the front planes C of refrigerator and freezer door
glass coincide.
Tip: If you struggle to connect both appliances, try
turning the inner legs 11 all the way in so that they do
not touch the floor. If you are struggling to adjust them,
use the tips in the "Door position adjustment" section
below
.
7 . Remove the two decorative covers 17
(pic. 5). Pull these towards you where
the hooks 18 are located. If you are
struggling to remove them, bend the
hooks using a screwdriver.

9. Take plate 4 and push it
under the
decorative panels so that
its holes 21 coincide with
holes 22
appliances (pic. 7).
10. Attach the plate using
four bolts 8. Reattach the
decorative panels using
the previously unscrewed
screws 19 (pic. 7).

relaxed
of the
8. Unscrew four screws 19 and relax
the clamps of the decorative
panels
towards you (pic. 6).
8

20 by pulling

them