The Charging Station's Park Button; Menu Functions - Husqvarna AUTOMOWER 305 Manual De Usuario

• PARK UNTIL FURTHER NOTICE. The robotic lawnmower stays
in the charging station until another operating mode is selected by
pressing the START button.
• START AGAIN IN 3 HOURS. The robotic lawnmower stays in the
charging station for three hours and then returns automatically to
normal operation. This operation selection is suitable when there
is a need to pause operation, e.g. for temporary irrigation or for
games on the lawn.
• START WITH NEXT TIMER. The robotic lawnmower stays in the
charging station until the next Timer setting permits operation. This
operation selection is suitable if one wishes to cancel an ongoing
mowing cycle and allow the robotic lawnmower to stay in the char-
ging station until the next day. This option is not displayed if there
are no Timer settings.

3.3 The charging station's PARK button

This section applies to Automower
The PARK button on the charging station is used to call the robotic
lawnmower back to the charging station. The PARK button on the key-
pad in the robotic lawnmower offers the same function. .
A LED in the PARK button is lit solid when the button has been pressed.
The LED diode goes out when the robotic lawnmower is parked in the
charging station.
The robotic lawnmower remains parked in the charging station until the
START button on the robotic lawnmower's keypad is pressed.

4 Menu functions

Main menu
There are a number of submenus under each option. You can access all
the functions to set the robotic lawnmower settings via these.
Automower 305/308
Automower 320/330X
Browse between menus
Browse through the main menu and submenus with the help of the
multi-choice buttons.(Automower
wer 320/330X). Enter values and times using the number keys and
®
confirm each selection with the multi-choice button marked OK. Press
BACK to go up a step in the menu or keep the HOME (Automower
305/308) alternatively MENU (Automower
for 2 seconds to go directly to the main menu.
English - 44
330X.
®
305/308) or the arrow keys (Automo-
®
320/330X) button pressed in
®
ENGLISH
Number series
A number series can be used as a shortcut to a certain function. The first
number in the series refers to the selection in the main menu. The
second number corresponds to the selection in the first submenu etc.
Submenus
Certain submenus contain a box that can be checked. This is used to
select which option(s) is/are selected or if a function is activated/deac-
tivated..
Menu structure
The following table summarises the menu selections found in the main
menu. For more detailed information about how each function is used
and which setting options are available, see the complete Operator's
manual on the attached DVD.
Timer
The lawn should not be cut too often to obtain the best mowing
result. Consequently, it is important to limit the operating time
using the timer function if the working area is less than the
robotic lawnmower's working capacity. The timer function is
also an ideal tool to control which periods the robotic lawnmo-
wer should not mow, for example, when the children are play-
ing in the garden.
Cutting height (for Automower
The cutting height can be varied from MIN (2 cm) to MAX (6 cm).
Security
In this menu, settings relating to security and the connection
between the robotic lawnmower and the charging station can
be made.
There are three security levels to choose from but it is also
possible to define your own combination of security functions.
Messages (for Automower
IHistorical, fault and information messages can be read in this
menu. Regards some of the most common fault messages,
there are tips and advice to help you rectify the fault.
Weather timer (for Automower
This function allows the robotic lawnmower to automatically
adjust its mowing times based on how quick the lawn grows.
When the weather is good for grass growth, the robotic lawn-
mower mows more often and when grass growth is slower the
robotic lawnmower will automatically spend less time on the
lawn.
Installation
This menu is used to steer the robotic lawnmower to remote
parts of a working area and to control how the robotic lawn-
mower searches for the charging station. For many working
areas the factory settings can be kept, i.e. allow the robotic
lawnmower itself to combine the various search methods and
the underlying settings.
Settings
This selection allows you to make changes to the general
robotic lawnmower settings such as date and time.
Accessories (for Automower
This menu handles the settings for accessories assembled on
®
the mower. Contact your dealer for information on what acces-
sories are suitable for your robotic lawnmower.
320/330X)
®
320/330X)
®
320/330X)
®
320/330X)
®