Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CHANGING THE TIMER
BATTERY
1. Insert flat-head screw-driver or similar object
into opening at left side of timer (located on
the control panel) and push up to release the
timer housing.
2. Once timer housing has been removed, turn
upside down and remove battery cover.
Replace with a L1154 button cell battery.
3. Place timer housing back into control panel.
CLEANING AND
MAINTENANCE
1. Always unplug appliance, detach the
breakaway cord and let the oil cool down to
room temperature before cleaning.
2. Remove lid.
3. Lift out basket.
4. The control panel should never be immersed
in water or other liquids. Before first use,
clean the outer surface of the heating
element with a damp cloth containing mild
soap solution or clean water.
5. Once the oil has cooled, line a sieve with
cheesecloth. Grasp each side of the
removable oil container and lift upward. Pour
the oil through the sieve and strain the used
oil through it to remove food particles,
crumbs and impurities. This process is safe
to repeat 3 or 4 times without the oil
deteriorating.
6. The frying basket should be hand-washed
before first use and should be seasoned with
oil before going into the dishwasher for the
first time. Lid, oil container and frying basket
are dishwasher safe. Dry parts thoroughly
after cleaning.
7. The stainless steel body is submersible and
should be washed by hand with warm, soapy
water.
8. Ensure that both the lid and the oil container
are completely dry after washing and before
use.
9. After cleaning, reassemble oil container,
heating element, basket and lid onto deep
fryer. The heating element must be seated
properly or appliance will not operate.
10. WARNING: When cleaning, use care – under-
edge of deep fryer is sharp.
11. For storage, basket handle can be folded
down to fit inside container.
12. Tip: For ease in cleaning, wipe control panel
with damp microfiber cloth. Microfiber cloths
are available in most kitchenware stores.
NOTE: Oil staining on the heating element and
oil container can be easily cleaned with a plastic
scrubbing pad.
13. NEVER PUT THE CONTROL PANEL IN
WATER OR OTHER LIQUIDS TO CLEAN.
Wipe it with a damp cloth or sponge. Do not
use abrasive cleansers, which could scratch
the surface.
Any other servicing should be performed by an
Authorized Service Representative.
SAFETY FEATURES
The Cuisinart
3.4-Quart Deep Fryer is equipped
®
with the following features to ensure safety:
•
Safety Interlock – The control panel/heating
element must be properly seated or deep
fryer will not operate.
•
Breakaway Cord – The cord is designed to
quickly disconnect from the appliance when
a pulling force is applied.
•
Thermostat Overload Protection – Your
Cuisinart
3.4-Quart Deep Fryer is equipped
®
with thermostat overload protection. If the
unit heats up beyond the recommended
temperature level, the deep fryer will
automatically turn off. To reset, unplug the
unit from the wall outlet and allow it to cool
down. Remove the control panel and heating
element from the unit.
CAUTION: The heating element is extremely hot.
Allow it to cool thoroughly before removing it.
•
You will find a reset button on the front of the
control panel below the controls. Using a
toothpick or another long, thin object, push
the reset button and replace the control
panel.
NOTE: The unit will not work if the control panel
is not properly mounted. Plug the unit back in,
turn on and continue use. If the unit still does not
operate, repeat the steps above or call a
Cuisinart Certified Customer Service Center for
assistance.
6
Capítulos
Tabla de contenido
