AEMC Instruments CA865 Manual De Instrucciones página 9

4.1 Operating the Model CA865
1. Connect the RTD to the instrument input.
2. Put the RTD near or on the sample tested.
3. Press the ON/OFF button. The Model CA865 will display degrees Cel-
sius (°C) at power-up. Press the back-light button
seconds to switch to degrees Fahrenheit (°F), if desired.
4. The RTD needs a certain time to respond. Take the reading when the
measurement has stabilized.
5. The HOLD button will freeze the measurement in the display, and will
not update until released.
6. When finished, remove the RTD from the sample, unplug the RTD
from the meter and slide the switch to OFF.
8
C
O
RTD PROBE CONNECTION
�
�
�
���� ����� ����������
4
HAPTER
PERATION
�
�
�
�����������
RTD Thermometer Model CA865
for more than 2
���
���
���
���Ω
�����
���