Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.
To avoid possible electrical shock, disconnect the sensor
connectors from the thermometer before opening the back
cover.
5.1
Replacing the Battery
The
symbol appears on the LCD display when replacement is
needed. Replace with a standard 9-volt battery (NEDA 1604, IEC 6F22).
To replace the battery:
•
Turn the Thermometer OFF.
•
Remove the sensor.
•
Remove the rubber holster.
•
Remove the screw from the back of the meter and lift off the
battery cover.
•
Replace the battery, then put the rear cover and holster back
on.
5.2
Cleaning
•
Use a soft cloth lightly dampened with soapy water.
•
Rinse with a damp cloth and then dry with a dry cloth.
•
Do not use any abrasives or solvents.
•
Do not let any liquid enter the case or sensor area.
RTD Thermometer Model CA865
C
HAPTER
M
AINTENANCE
5
will not be held
®
9
Tabla de contenido
