The robot does not return to
the charging base after spot
cleaning or after changing
starting position.
The robot does not resume
cleaning
The robot is always offline • Make sure the robot is successfully connected to the ne-
Connection between the
mobile phone and the robot
failed
10. TECHNICAL SPECIFICATIONS
Model: Conga 3690 Absolute
Reference No.: 05433
100-240 V~50/60 Hz
Battery: 14.8 V, 3200 mAh
Made in China | Designed in Spain
11.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), specifies that old household electrical appliances must not be disposed of with
the normal unsorted municipal waste. Old appliances must be collected separately, in
order to optimize the recovery and recycling of the materials they contain, and reduce the
impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
• The robot will map and calculate a new route after opera-
ting under spot cleaning or after having changed its starting
position.
• If the charging base is very far away from the robot, it will
not be able to charge back automatically. Put the robot back
on the charging base manually.
• Make sure the robot is not in DND mode, it will not resume
cleaning under this mode. It won't resume cleaning when it
is placed manually on the charging base.
twork and always in the range covered by the Wi-Fi signal.
• Make sure the robot and the charging base are in an area
with good Wi-Fi signal, reset the router and try connecting
them again.
Frequency Bands: 2.412-2.472 GHz 5.150-5.250 5.250-
5.350 GHz 5.470-5.725 GHz
Maximum Transmission Power: 16 dBm
ENGLISH
39