3M 43 Serie Manual Del Usuario página 4

To reduce the risks associated with all residual hazards:
• Read, understand, follow and retain for future reference all safety statements in each applicable equipment owner's
manual and refer to the applicable Material Safety Data Sheet & material container label for each material to be
sprayed before using your 3M equipment.
• This equipment is to be used only by professionals familiar with the possible applicable safety hazards.
• Do not use this product around unsupervised children.
• Never modify any part of this product.
• Always comply with local, state, and national codes governing ventilation, fire protection, operation, maintenance,
housekeeping and disposal plus all safety statements in applicable owner's manual, MSDS and material container
labels.
To reduce the risks associated with chemical exposure:
• Never point a spray gun at anyone or any part of the body. Never place your hand or fingers in front of a spray
nozzle.
• Before use, check spray equipment for damage and proper function & repair/replace worn, damaged or
malfunctioning components.
• Always wear appropriate, approved personal protective equipment for eye, skin, respiratory and hearing protection
per the applicable MSDS and material container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• Must maintain adequate ventilation per applicable MSDS and material container labels for each material being
sprayed in the work area.
• All ignition sources, such as smoking, must be kept out of the spray area.
• Always maintain a readily available, approved fire extinguisher or other approved fire fighting equipment in the
spray area.
• Always locate the pump assembly as far away from spray area as the air/material supply hoses allows.
• See state and local electrical codes on grounding this equipment. Failure to properly ground equipment can result
in sparking that may ignite volatile materials.
• To avoid static sparking and material splashing, always shut off atomizing air to the spray gun and firmly hold a
metal component of the spray gun to the side of a grounded metal pail during flushing operations.
To reduce the risks associated with repetitive strain:
• Avoid using spray equipment continuously without taking occasional breaks.
To reduce the risks associated with sharp components:
• Always follow user instructions for replacing and handling of all sharp components.
To reduce the risks associated with noise:
• Wear ear protection if using the diaphragm fluid pump for an extended period of time.
WARNING
3
3