Temper KOBAN KCER-01MF Manual Del Usuario página 99

KCER-01MF
Multifunction Tester
Figure 12 L-N Line Impedance – Test leads connection
6. When measuring is completed, impedance of L - N and PSC value appears on the screen
Figure 13 L - N Line Impedance – Measurement completed
7. Press TEST button if re-test is necessary
When symbol from
voltage exceeds 260V, the measurement will not take place
5.2.5 Using The RCD Function
You can select UL Voltage by Pressing and hold F3 button
for more than two seconds (25V or 50V).
Uf value appears is the contact voltage on the screen .
26
, , appears lower left corner, and if the
www.grupotemper.com