Temper KOBAN KCER-01MF Manual Del Usuario página 90

KCER-01MF
Multifunction Tester
If the wiring condition is other than normal, the Tester is limited on its measurements that can be performed.
Notes:
1) Will not detect two hot wires in a circuit.
2) Will not detect a combination of defects.
3) Will not detect reversal of grounded and grounding conductors.
：Indicates the battery status.
：80%~100%
：50%~80%
：20%~50%
：6%~20%
：Low Battery
5.1.2. Displayed icons (symbols) and messages in LOOP/PFC function
test leads to the appropriate terminals.
If the wiring condition is other than normal, the Tester is limited on its measurements that can be performed.
Notes:
1) Will not detect two hot wires in a circuit.
2) Will not detect a combination of defects.
3) Will not detect reversal of grounded and grounding conductors.
：Indicates the battery status.
：80%~100%
：50%~80%
：20%~50%
：6%~20%
：Low Battery
:Indicates high temperature and therefore cannot make any measurements
Message:
Measuring : Function in use - measurement being carried out
RCD Trip : During the measurement, the RCD has tripped therefore no test result obtained
-Noise-:Appears during the No Trip Loop Measurement, and indicates that the displayed value may
17
：Indicates the correct input terminal connectivity . The user should connect the
：Indicates L connection is connected on the N input terminal and vice-versa
：Indicates no connection on the PE input terminal
www.grupotemper.com