SEA 23001210/15 Manual De Instrucciones página 5

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
RADIO TRANSMITTERS PROGRAMMING
Note: The control unit will automatically recognize the linked module (RF Roll Plus or RF
standard). With the RF Roll Plus module it is possible to administrate only the COCCINELLA ROLL
PLUS and SMART ROLL PLUS remote controls, with the standard RF module it is possible to
administrate the COCCINELLA COPY and DIP, the SMART DUAL and the HEAD DIP remote
controls.
Note: When using remote controls with 12 bits (Coccinella Copy or Smart Dual) it is possible
to insert max 48 different codes (1 button = 1 code). It is possible to add further remote
controls making copies of one of the already programmed radio transmitters.
With Rolling Code remote controls up to 800 different codes can be added but it is not
possible to add copies of the radio transmitters.
Selflearning of the radio transmitter Start
1) Press P2 for 3 seconds, LEDs 1 and 2 will flash alternately.
2) Press P1 to select LED1, afterwards press P2 (LED1 stays turned on) to confirm the choice and
press the button of the radio transmitter to which you want to assign the start. LED 1 switches off,
signal has been learned.
Selflearning of the pedestrian start from radio transmitter
1) Press P2 for three seconds, leds 1 and 2 will flash alternately.
2) Press P1 twice, to select LED2, afterwards press P2
(LED2 stays turned on) to confirm the choice and press the button of the radio transmitter to which
you want to associate the pedestrian start.
LED1 switches off, signal has been learned.
Erasing of all transmitters
1) Press P2 for three seconds, the LEDs 1 and 2 will flash alternately.
2) Keeping pressed P1, press the P2 button for three times.
Cod. 67410712
®
English
Rev. 00 - 03/2012
5