Instructions; Operator Instructions; First Use Of The Device; Cooking Use - edenox HC-611 Manual De Instrucciones

6 INSTRUCTIONS

First use of the device

Remove all plastic film protectors. In case of some remnants of glue, use a suitable liquid solvent and then
clean with soap and water.
The interior of the chamber and the trays should be cleaned with soap and water before the first use. Then
switch on the oven until its reach 200⁰C during 30 minutes.
Warning: never use products that can be aggressive and acidic which can damage the device.
Warning: always when you are going to do any maintenance or cleaning, disconnect the device from the
power and let the device cool down.
Warning: NO DO NOT USE WATER JET DIRECT ON THE APPLIANCE, it may damage some
component.

Cooking use

The unit is designed for use in baking bakery and pastry, regulation ranges being:
The distance between trays is 80 mm in the HC-611 series, and 65 mm in the F series, and whenever
possible, we recommend leaving a space between pieces 40-60 mm in the same tray, for air to flow efficiently.
We recommend perforated aluminium trays for pastry and bakery, steel for gastronomy and grills for
roast. Also we recommend you, to preheat the appliance at a temperature 30 ° C above the temperature of the
food cooking for about 20 minutes; this guarantees a better finished product.

6.1 Operator Instructions

SERIE
Temperature
Time
Humidity
HC-611
50ºC – 250ºC
0-120 min+ non stop
0- 100 %
14