Product Diagram; Adding Water; How To Use - TaoTronics TT-AD004 Guía De Usuario

Product Diagram

Light Button
Maximum Water Level
Mist Outlet
Cover
Base
Mist Button Air Inlet
Air Outlet
DC Socket

Adding Water

- Remove the cover and the tank lid.
- Add up to 400mL water into the water tank.
- Add 2 – 3 drops (0.1 – 0.15mL) of essential oil into the water.
- Put the cover back on.

How to Use

Connect the power adapter. The diffuser is now in standby status. Make sure there is enough water
inside the tank.Use the Light Button to control the color of the light. Use the Mist Button to set the
mist timer, turn misting on/off, and adjust between high and low mist mode.
Light Button
• Press the Light Button once to automatically cycle through different colors. Press again to stay on
the current color. If you keep pressing the Light Button, it will manually cycle through all of the
colors. Press one more time and the light will turn off.
• Press and hold the Light Button for 2 - 3 seconds until two beeps are heard to turn the light off.
Mist Button
• Press the Mist Button once to turn on the 1H mist timer (the corresponding LED indicator will light
up). Keep pressing to cycle through the 3H timer, 6H timer, and ON. When set to "ON"mode,the
unit will stay on until all water has been depleted. You can also press the Mist Button one more
time to manually shut it off.
• When the unit is turned on, press and hold the Mist Button for 2 – 3 seconds to adjust between
high and low mist mode. One beep sound indicates high mist mode is on, and two beep sounds
indicate low mist mode is on.
Important
- Do not exceed the max level when adding water.
- Stop using when water in the water tank is depleted.
- Do not power on when the lid is not properly covered.
- Use with essential oil and water together. Never use with essential oil only.
- Only use with natural essential oil. Synthesized essential oil may damage the product.
03/04