Hama 00181515 Instrucciones De Uso página 5

Warning – Rechargeable battery
• Use suitable USB charging devices only for
charging.
• As a rule, do not use charging devices that are
defective and do not try to repair them yourself.
• Do not overcharge the product or allow the
battery to completely discharge.
• Avoid storing, charging or using batteries in
extreme temperatures.
• When stored over a long period of time,
batteries should be charged regularly (at least
every three months).
• Never charge the power pack using the USB
port of a PC/notebook.
5.2 Power supply of the Echo Dot
Connect the Micro-USB plug of the adapter plate to
the Micro-USB port on your Echo Dot. Now pull the
backing material off the adhesive pad and attach
the adapter plate to the bottom centre of the Echo
Dot. Place the Echo Dot in the power pack's charging
cradle and make sure that the charging contacts
lie on top of each other. The contact pins must line
up with the corresponding contact openings of the
adapter plate. Press the Power button once to switch
the power pack on. The Echo Dot is now ready for
use. To switch the power pack off, brie y press the
Power button twice in succession.
Warning
Do not connect a smartphone/tablet for charging
while power is being supplied to the Echo Dot.
5.3 Charging terminal devices
• Before you begin charging a smartphone/tablet, the
Echo Dot must be removed from the power pack.
• Connect the included Micro-USB charging/con-
nection cable to the USB port on the power pack
and to the Micro-USB port on your terminal device
(mobile phone, smartphone, etc.).
• The included charging/connection cable may
not be suitable for the USB port of your terminal
device. In this case, use the USB cable that was
included with your terminal device.
• To start charging, press the button on the power
pack. The status LEDs show the remaining capacity
of the power pack when charging.
• The current battery status of your terminal device
will appear on this device.
• Brie y press the button on the power pack twice
in succession to stop charging and to switch the
power pack off. The status LEDs go out. You can
now reinsert the Echo Dot.
• The power pack will automatically switch off
after about 30 seconds if it is not connected to a
terminal device.
Warning – Connecting terminal devices
• Before connecting a terminal device, check
whether the power output of the power pack is
su cient for charging the device.
• Ensure that the total power consumption of all
connected terminal devices does not exceed
2100 mA.
• Please refer to the operating instructions for
your terminal device.
• It is essential that you observe the speci cations
provided there as well as the safety instructions
regarding the power supply of your devices.
Warning
• Never connect the charging cable of the power
pack to both the input and the output of
the power pack at the same time. This could
damage the battery.
• Do not connect any terminal devices while the
power pack is charging. This could damage the
power pack and the connected device.
3