Edirol UA-1X Manual Del Usuario página 26

Connections and Driver Installation (Macintosh)
fig.03-06.e
3
Turn down the volume
on the UA-1X, and on
your audio equipment,
then click [Start Test].
fig.03-07.e
4
Use the [Main Volume]
bar to adjust the volume.
When you are finished,
click [Stop Test].
Test sounds are output from
left to right, along with what
appears on the screen.
fig.03-08.e
5
In the Sound dialog box,
click the Input tab.
In Choose a source for
sound input, select
USB audio.
* Do not check "Play sound
through output device."
26
The contents of the display
will differ depending on your
operating system and data.
Depend on the your OS
version, there is no Main
Volume bar. In that case, use
the Volume bar in the Output
to adjust the volume.
If USB audio is not displayed,
close the "Sound" dialog box,
and disconnect the UA-1X's
USB cable from the Macintosh.
Perform the driver installation
once again.(p. 24)