Connections And Driver Installation (Os 9) - Edirol UA-1X Manual Del Usuario

Connections and Driver Installation (Macintosh)

Connections and Driver Installation (OS 9)

To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before disconnecting the USB cable. It is
not necessary to turn off the power of your computer. Use
a USB cable to connect the UA-1X to your computer before
turning on the power of your audio equipment.
1
With the UA-1X disconnected, start up the Macintosh.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
2
Exit all currently running software (applications).
If you are using virus checking or similar software, be sure
to exit it as well.
fig.03-02.e
3
After starting up Mac
OS, select Apple
System Profiler from
the Apple menu.
The "Apple System
Profiler" dialog box will
appear.
4
Click the Devices and Volumes tab.
5
Choose Update all information from the Commands
menu.
6
Use a USB cable to connect the UA-1X to your
computer.
24
This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.