After Ironing - URSUS TROTTER UT-PLATTEISEN Manual De Usuario Y Letra De Garantía

USING YOUR STEAM IRON
Before first use
1. Remove any sticker, protective foil or storage cover
from the soleplate.
2. Heat up the iron to maximum temperature and iron
over a piece of damp cloth for several minutes on the
purpose of removing any residue on the soleplate.
Note: It is normal that strange odor comes out from
the unit for the first use.
Operation
1.Hold the iron in a tilted position, then fill proper water
into water tank. by measuring cup, you had better use
purified water with less calcium particles and make sure
not to exceed Max level on the tank. See fig 1.
2. Press down cover of water tank and you will hear a
click if it is in the correct position.
3. Connect plug to outlet and turn temperature dial to
your desired setting, which is depended on the fabric of
garment. And indicator light will be illuminated. Refer to
Fig.2 and IRONING TIPS latter.
Figure 1
Figure 2
4. Make sure steam button is on dry position. (See fig 3),
then place the iron vertically (See fig 4).
Figure 3
5. Once soleplate temperature has reached the preset
temperature, indicator light will be off, then set steam
button to your desired steam output or dry position and
begin ironing.
WARNING: Not touch hot soleplate at any time before
cooling down!
6. Press spraying water button a couple of times to
moisten the laundry if necessary, before spraying make
sure that there is enough water in water tank.
7. Steam shot function had better be used at max
temperature, as it helps remove stubborn creases.
8. The iron has an anti-drip function: if ironing garments
for long time, soleplate temperature will fall off, the iron
will stop coming out steam automatically and no water
droplets can come out from soleplate.
9. "Steam shot" can also be applied when holding the
iron in a vertical position, so this is useful for removing
creases from hung clothes, curtains, etc.
CLEANING AND MAINTENANCE

After ironing

1. Disconnect power supply and empty the water left in
water tank.
2. Reconnect into power supply and disconnect after
indicator light goes off, make soleplate dry.
3. Let the iron completely cool down, then wipe flakes
and any other deposits on the soleplate with a damp
cloth or a non-abrasive (liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable
surface with a cloth protecting the soleplate.
Self-clean function
We should clean the unit regularly according to hardness
of water and using frequency.
1. Fill water into the water tank and set the temperature
selector to Max position
2. Connect into power supply and indicator light will
be illuminated, make sure Steam button is in the Dry
position, then place iron as fig.4
Warning: never pour white vinegar or other liquid
cleaners for eliminating calcium into water tank!
3. Once the light is off, hold the iron over the sink and
turn steam button to SELF CLEAN position (Fig.3) with a
little force. Steam and boiling water will come out of the
Figure 4