URSUS TROTTER UT-PLATTEISEN Manual De Usuario Y Letra De Garantía página 6

Instruction Manual
DAMPFBUGELEISEN
UT-PLATTEISEN
Read instruction manual carefully before using the
appliance.
IMPORTANT SAFEGARDS
Before using the electrical appliance, the following basic
precautions should always be followed including the
following:
1. Read all instructions and save it for future reference.
2. Before using check that the voltage of wall outlet
corresponds to the one shown on the rating plate.
3. Burns may occur from touching hot metal parts, hot
water, or steam. Use caution when you turn a steam iron
upside down as there may be hot water in water tank.
4. If any part is damaged it must be replaced by the
manufacturer or an authorized service agent or a
qualified technician in order to avoid a hazard.
5. Don't operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or is dropped
or damaged in any manner, Return the appliance to the
nearest authorized service facility for examination, repair
or electrical or mechanical adjustment.
6.Do not let cord hang over edge of table or hot surface.
7.the plug of power cord must be removed from outlet
before water tank is filled with water.
8. Unplug from outlet when not in use, before filling
water or cleaning.
9.Do not operate the iron for other than its intended use.
10. To protect against a risk of electric shock, do not
immerse the iron in water or other liquids.
11. Close supervision is necessary for any appliance being
used by or near children.
12.Do not leave iron unattended when connected into
power supply or on an ironing board.
13. Do not use outdoors.
HOUSEHOLD USE ONLY
KNOW YOUR STEAM IRON
A. Soleplate
B. Spraying nozzle
C. Water filling inlet
D. Variable steam button
E. Steam shot button
F. Spraying button
G. Cord bushing
H. Indicator light
I. Temperature dial
J. Self-cleaning button
Soleplate
Which is made of ceramic coating, it can be heated up
and be used to iron the garment.
Spraying nozzle
When pressing spraying water button instantly, water is
sprayed from this outlet.
Water tank inlet
Filling water into water tank from it, Make sure water
should not exceed the Max level (350ml) as indicated on
water tank.
Variable steam button
Move the button to select the desired steam output
for each garment, if selecting the "
indicates ironing without steam.
Spraying button
Pressing the button instantly provides a fine mist spray
to dampen hard-to-iron fabrics.
Steam shot button
Pressing the button instantly provides a powerful shot of
steam to eliminate stubborn wrinkles.
3600 Cord bushing
Cord bushing allows free movement of power cord in any
direction with great maneuverability when ironing.
Indicator light
When indicator light is illuminated, it indicates that
the iron is heating; it will goes out when it has reached
selected temperature.
Temperature dial
Turning the dial to set ironing temperature that is
different with the garment changed.
" position, it