Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fixing head position. To disassemble,
unscrew as shown in picture
The head can be easily taken away and exchanged, and fixed again
NAIL DUST COLLECTOR
The dust collector will turn on automatically when activating the driller unit.
Caution
1. Drilling head will warm up after operation, due to mechanical transmission. Please do
not touch till heat has cool down.
2. Please switch off machine after operation.
3. Keep children away from the grinder.
4. It is recommended to wear protective glasses or dust mask when working with driller.
(Also please wear protective glasses when clean machine with air compressor.
5. Only nail dust can be thrown in the dust collector.
Magnifying Lamp
3. Connect machine to the power supply, and then turn it on.
4. Press Q
off LED light on magnifying lamp. LED light can also be activated through switch on
lamp.
Magnifying lamp is equipped with bending arm, to illuminate exactly where the lighting
point is required.
Picture 8
Picture 10
, then LED on magnifying lamp will light up. Press Q
Rotate from S to R point
Picture 9
Picture 11
again to turn
Tabla de contenido
