SEVERIN WK 3477 Instrucciones De Uso página 21

Before using for the fi rst time
∙ Unpack the appliance completely and
remove all packaging materials.
∙ To clean the kettle, boil (with the tea
fi lter in place) and discard the fi rst fi lling
of water.
Operation
Heating water
∙ Remove the water container from its
base; then turn the lid insert anti-
clockwise (UNLOCK) and take it off.
∙ Fill the container with water to the
desired level, observing the Min (0.5 l)
and Max (1.7 l for heating water)
markings.
∙ Replace the lid insert and turn clockwise
(LOCK) until it is heard locking into
place.
∙ Place the container back on its base.
∙ Insert the plug into a suitable wall
socket.
∙ A beep signal is heard and the display
shows C, followed by the current water
temperature inside the container. The
indicator light Heating-up
fl ashing. The appliance is now in Stand-
by mode.
∙ Use the Temperature button
set the desired temperature, and then
confi rm by pressing the On/Off button
. The indicator light
display shows the selected temperature,
followed by the current temperature.
∙ The heating process begins. Once the
pre-set temperature has been reached,
the appliance is automatically switched
off; three short beep signals are heard
starts
to
comes on. The
and the indicator light
∙ The boiling process may be interrupted
by pressing the On/Off button
appliance is now in Stand-by mode.
∙ To pour hot water, remove the container
from its base.
∙ To prevent hot steam from being
emitted, ensure that the lid remains
closed while pouring out the water.
∙ Remove the plug from the wall outlet
after use.
∙ Do not leave any residual water in the
container.
Quick-Boil function
When placing the water container onto
the base and pressing the
water is heated to 100 °C without the
need to set a temperature.
Making tea
∙ Remove the water container from its
base, turn the lid insert anti-clockwise
(UNLOCK) and take it off. Take out the
tea fi lter.
∙ Fill the container with water to the
desired level, observing the Min (0.5 l)
and Max (1.5 l for making tea) markings.
∙ Heat up the water as described in the
section Heating water.
∙ Put the required amount of tea into the
tea fi lter.
∙ Once three beep-signals are heard and
the indicator light
the lid insert by turning it anti-clockwise
and remove it. Caution: Take special
care, as hot steam may be emitted! If
necessary, use oven gloves.
∙ Fit the tea fi lter in the container,
goes out.
. The
button, the
goes out, release
21