Riello 917T1 Manuales

Manuales y guías de usuario para Riello 917T1. Tenemos 2 Riello 917T1 manuales disponible para descarga gratuita en PDF: Instrucciones De Instalación, Uso Y Mantenimiento

Riello 917T1 Instrucciones De Instalación, Uso Y Mantenimiento

Riello 917T1 Instrucciones De Instalación, Uso Y Mantenimiento (84 páginas)

Marca: Riello | Categoría: Quemadores | Tamaño: 2 MB

Tabla de contenido

English

3
- Tabla de Contenido
  3
- Declarations
  5
- Information and General Warnings
  7
- Information about the Instruction Manual
  7
- Introduction
  7
- General Dangers
  7
- Other Symbols
  7
- Delivery of the System and the Instruction Manual
  8
- Guarantee and Responsibility
  8
- Safety and Prevention
  9
- Background
  9
- Personnel Training
  9
- Burner Categories - Countries of Destination
  10
- Models Available
  10
- Burner Designation
  10
- Technical Description of the Burner
  10
- Technical Data
  11
- Electrical Data
  11
- Maximum Dimensions
  12
- Firing Rates
  13
- Test Boiler
  14
- Commercial Boilers
  14
- Burner Description
  15
- Burner Equipment
  15
- Electrical Control Box
  16
- Control of the Supply
  17
- Preliminary Checks
  17
- Instructions to Avoid Burnout or Bad Combustion of the Burner
  17
- Handling
  17
- Notes on Safety for the Installation
  17
- Installation
  17
- Control of Burner Characteristics
  18
- Operating Position
  18
- Securing the Burner to the Boiler
  19
- Combustion Head Adjustment
  20
- Removing the Head Assembly
  20
- Reassembling the Head Assembly
  20
- Positioning the Probe - Electrode
  21
- Air Damper Adjustment
  21
- Gas Train Electrical Power
  22
- Gas Feeding
  22
- Gas Feeding Line
  22
- Gas Train
  23
- Gas Pressure
  23
- Electrical Wiring
  24
- Electrical System Carried out by the Factory
  25
- Operating Programme
  26
- Table of Times
  27
- Operations Status Indication
  27
- Fault Diagnostics - Lockouts
  28
- Recycle and Limit of Repetitions
  29
- Presence of an Extraneous Light or Parasite Flame
  29
- Checking the Air Pressure Switch
  29
- Intermittent Operation
  29
- Checking the Gas Pressure Switch
  29
- Shut-Down Test
  29
- Duration of Ignition Transformer Discharge
  30
- Reset by Button and Remotely of the Burner
  30
- Protection Reset
  30
- Reset Push-Button Anomaly
  30
- External Lockout Signal (S3)
  30
- Hour Counter Functioning (B4)
  30
- Monitoring the Power Supply Voltage
  30
- Frequency Supply Error
  30
- Internal Voltage Anomaly
  30
- Checking the Fan Motor
  30
- Post-Purging
  31
- Continuous Purging
  31
- Checking the Faults of the 1St and 2Nd Stage Valve and the Motor
  31
- Ionisation Current
  31
- Eeprom Check
  31
- Lockout Log
  32
- Logging of Burner Operating Parameters
  32
- Admissible Lengths of the External Connections to the Burner
  32
- Long Pre-Purging
  32
- Programming Menu
  33
- General Notes
  33
- Block Diagram for Entering the Menu
  33
- Setting the Opening Delay of the 2Nd Stage
  34
- Setting a Long Pre-Purging
  34
- Shut-Down Test
  34
- Intermittent Operation
  34
- Post-Purging and Continuous Purging
  34
- Displaying the Lockout Log
  35
- Resetting the Programming Menu Parameters and the Lockout Log
  35
- Lockout Types
  36
- Start-Up, Calibration and Operation of the Burner
  37
- Notes on Safety for the First Start-Up
  37
- Adjustments Prior to Ignition
  37
- Gas Pressure Switch
  37
- Air Pressure Switch
  37
- Combustion Adjustment
  37
- Safety Test - with Gas Ball Valve Closed
  38
- Checking and Cleaning
  38
- Maintenance
  38
- Maintenance Frequency
  38
- Maintenance Programme
  38
- Notes on Safety for the Maintenance
  38
- Safety Components
  39
- Opening the Burner
  39
- Faults - Possible Causes - Solutions
  40
- Start-Up Problems
  40
- Operating Faults
  41
- Appendix - Accessories
  42
Español

43

Riello 917T1 Instrucciones De Instalación, Uso Y Mantenimiento

Riello 917T1 Instrucciones De Instalación, Uso Y Mantenimiento (80 páginas)

Marca: Riello | Categoría: Quemadores | Tamaño: 4 MB

Tabla de contenido

English

3
- Tabla de Contenido
  3
- Declarations
  5
- Information and General Warnings
  6
- Information about the Instruction Manual
  6
- Introduction
  6
- General Dangers
  6
- Other Symbols
  6
- Delivery of the System and the Instruction Manual
  7
- Guarantee and Responsibility
  7
- Safety and Prevention
  8
- Background
  8
- Personnel Training
  8
- Burner Categories - Countries of Destination
  9
- Models Available
  9
- Burner Designation
  9
- Technical Description of the Burner
  9
- Technical Data
  10
- Electrical Data
  10
- Maximum Dimensions
  10
- Firing Rates
  11
- Test Boiler
  12
- Commercial Boilers
  12
- Burner Description
  13
- Burner Equipment
  13
- Electrical Control Box
  14
- Handling
  15
- Instructions to Avoid Burnout or Bad Combustion of the Burner
  15
- Installation
  15
- Notes on Safety for the Installation
  15
- Preliminary Checks
  16
- Control of the Supply
  16
- Control of Burner Characteristics
  16
- Operating Position
  16
- Securing the Burner to the Boiler
  17
- Combustion Head Adjustment
  18
- Removing the Head Assembly
  18
- Reassembling the Head Assembly
  18
- Positioning the Probe - Electrode
  19
- Air Damper Adjustment
  19
- Gas Train Electrical Power
  20
- Gas Feeding
  20
- Gas Feeding Line
  20
- Gas Train
  21
- Gas Pressure
  21
- Electrical Wiring
  22
- Electrical System Carried out by the Factory
  23
- Operating Programme
  24
- Table of Times
  25
- Operations Status Indication
  25
- Fault Diagnostics - Lockouts
  26
- Presence of an Extraneous Light or Parasite Flame
  27
- Recycle and Limit of Repetitions
  27
- Checking the Air Pressure Switch
  27
- Intermittent Operation
  27
- Checking the Gas Pressure Switch
  27
- Shut-Down Test
  27
- Duration of Ignition Transformer Discharge
  28
- Reset by Button and Remotely of the Burner
  28
- Protection Reset
  28
- Reset Push-Button Anomaly
  28
- External Lockout Signal (S3)
  28
- Hour Counter Functioning (B4)
  28
- Monitoring the Power Supply Voltage
  28
- Frequency Supply Error
  28
- Internal Voltage Anomaly
  28
- Checking the Fan Motor
  28
- Post-Purging
  29
- Continuous Purging
  29
- Checking the Faults of the 1St and 2Nd Stage Valve and the Motor
  29
- Ionisation Current
  29
- Eeprom Check
  29
- Lockout Log
  30
- Logging of Burner Operating Parameters
  30
- Admissible Lengths of the External Connections to the Burner
  30
- Long Pre-Purging
  30
- Programming Menu
  31
- General Notes
  31
- Block Diagram for Entering the Menu
  31
- Setting the Opening Delay of the 2Nd Stage
  32
- Setting a Long Pre-Purging
  32
- Shut-Down Test
  32
- Intermittent Operation
  32
- Post-Purging and Continuous Purging
  32
- Displaying the Lockout Log
  33
- Resetting the Programming Menu Parameters and the Lockout Log
  33
- Lockout Types
  34
- Start-Up, Calibration and Operation of the Burner
  35
- Notes on Safety for the First Start-Up
  35
- Adjustments Prior to Ignition
  35
- Gas Pressure Switch
  35
- Air Pressure Switch
  35
- Combustion Adjustment
  35
- Safety Test - with Gas Ball Valve Closed
  36
- Checking and Cleaning
  36
- Maintenance
  36
- Maintenance Frequency
  36
- Maintenance Programme
  36
- Notes on Safety for the Maintenance
  36
- Safety Components
  37
- Opening the Burner
  37
- Faults - Possible Causes - Solutions
  38
- Start-Up Problems
  38
- Operating Faults
  39
- Appendix - Accessories
  40
Español

41

Productos relacionados

Riello Categorias

Quemadores Calderas Calentadores Unidades de Control Calentadores de Agua

Más Riello manuales