Marq Gesture Spot 300 Guía De Usuario página 6

Follow these steps to use a
2
1 3
safety cable (not included) to
secure the fixture to a truss. We
recommend using a safety
cable with a diameter of at least
5 mm and a load capacity of at
least 149 lbs. (67 kg).
Linking
When using multiple Gesture Spot 300 fixtures, you can link ("daisy-chain") them so that each each
fixture sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup
time.
DMX
Use a standard 3-pin DMX cable to connect the DMX Out of one fixture to the DMX In of another.
Your connected DMX controller will send its data to the fixtures in sequence. All fixtures in this chain
will receive all DMX data.
DMX Controller Gesture Spot 300 Gesture Spot 300
Gesture Spot 300
6