Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Features
Top Panel
7
5
6
8 9
1.
Display: This screen shows the current parameters, values, etc., depending on your
current operation.
2.
Value Dial: Turn this knob to change the currently selected value shown in the display.
Press and hold this knob while turning it or the Parameter Knobs to move by increments
of 10.
3.
Select +/–: Press these buttons to move to the next or previous parameter or setting
shown in the display.
Press both buttons simultaneously to save a kit. See Operation > Saving Kits to learn
more.
4.
Main: Press this button to return to the main screen in the display.
Press and hold this button while connecting MPX16's USB Port to your computer's USB
port to access an SD card inserted into MPX16's SD Card Slot. See Operation > Using
MPX16 as an SD Card Reader to learn more.
5.
Volume: Turn this knob to adjust the volume of the Main Out and Headphone Out.
6.
Rec Gain: Turn this knob to adjust the level of the incoming signal being recorded. This
affects both the Microphone and Rec In.
7.
Microphone: Record audio into this built-in microphone. Control the input recording level
with the Rec Gain knob. The microphone will be automatically disabled if a cable is
connected to either Rec In jack.
8.
Record Sample: Press this button to enter Record Sample Mode. See Operation >
Recording Samples to learn more.
Press this button and Sample Edit simultaneously to silence all sounds playing from
MPX16 immediately.
9.
Sample Edit: Press this button to Sample Edit Mode. See Operation > Editing Samples
to learn more.
Press this button and Record Sample simultaneously to silence all sounds playing from
MPX16 immediately.
1
2
3
10
11
12
12
4
4
12
12
10
Tabla de contenido
