Akai Professional MPX16 Guia Del Usuario página 11

Parameter Parameter
Family
A: Cutoff (Cut)
Filter/MIDI
B: Resonance (Res)
C: Envelope>Filter (E>F)
D: MIDI Note (MID)
A: Trigger Mode (Trg)
Utility
B: Choke Group (C.G)
C: Mono/Poly (M/P)
D: Velocity (Vel)
Description
The cutoff setting of the 4-pole low-
pass filter.
The resonance setting of the 4-pole
low-pass filter.
How much the filter envelope affects
the current pad's filter cutoff. (When
set to 100, the envelope level will be
added to the cutoff value.)
The MIDI note sent and received by
the pad.
How the pad will play its sample when
pressed, which also affects the filter
and amplitude envelopes:
One-Shot: When you press the pad,
the entire sample will play.
Loop: When you press and hold the
pad, the sample will loop until you
release it.
Hold: When you press the pad, the
sample will loop until you press the
pad again.
The pad's choke group. When you
press a pad in a choke group, all
samples assigned to other pads in that
choke group will stop playing.
How the pad plays a second instance
of its sample if you press it again
before its sample finishes playing.
Mono: Pressing the pad before its
sample is finished will cause the
sample to restart.
Poly: Pressing the pad before the
sample is finished will trigger a second
instance of the sample.
How the pad will respond to velocity
(how hard you press it).
On: The force with which you hit the
pad affects its playback volume.
Off: Pressing the pad will play the
sample at full volume.
11
Range/Options
000 – 100
000 – 100
000 – 100
000 – 127
One Shot (1Sh),
Loop (Lp),
Hold (Hld)
01 – 16
Mono (Mon),
Poly (Pol)
On,
Off