Care and maintenance
METAL PARTS (STRUCTURE AND LEGS)
This product has been made with resistant materials of the
highest quality. With correct care and maintenance you will
be able to enjoy it for many years. However, dirt or other
contaminants and bad use could damage it.
For the optimal conservation of pieces manufactured in
steel, especially if they are exposed to the elements, periodic
maintenance is advised.
For maximum resistance to corrosion, steel surfaces must
always be kept clean. This maintenance must be tailored
to the conditions to which your product is exposed (dust,
dirt, humidity in combination with heat, salty or potentially
corrosive environments, etc.). This can vary from one to four
times a month, in normal settings, or up to once a day in
cases of unhygienic or very rough conditions.
You must be the one who adjusts and evaluates the
periodicity of the maintenance according to how the
material reacts, increasing or reducing it depending on
what is necessary for proper product care. In any case, we
recommend cleaning it at least once a week, as a starting
point.
Therefore, it's important to keep the product clean.
Please follow these simple instructions to keep the product
in good condition:
• For cleaning steel, use only a cloth dipped in warm water
and mild soap. Never use abrasive soaps or detergents, as
they can leave scratches and produce discoloration.
• Rub gently with a damp cloth. Rinse and wring the cloth
frequently, to keep it moist. Make sure to rinse well and dry
with another cloth.
• If the surface is glossy, you must wash it along the grain,
to avoid scratching the surface. On polished surfaces, you
must previously remove dust to avoid scratching the surface.
• If the event of a spill, clean the stain as quickly as possible.
• If you are unable to remove the stains with a damp cloth,
apply a metal cleaner to the surface with a cloth. Read the
instructions for the cleaner carefully, and test it first on an
inconspicuous spot. Make sure to rinse well and dry with
another cloth.
When the product is extremely dirty, with stains,
incrustations, or signs of surface discoloration due to long
periods of neglect, or poor maintenance, we recommend
contacting professionals to restore the surface's initial
appearance.
HPL PARTS (FIELD)
HPL does not require special care.
• Clean with a cloth dampened in warm water and mild soap.
• Never use abrasive soap or detergent, sandpaper or steel
wool since they could scratch the surface or make colours
fade.
RS#4Fun — User's manual / Manual de usuario
8
• Never use furniture polish which contains wax, since these
kinds of products tend to leave a sticky layer on the surface
which attracts dust and dirt.
PINE OR BEECH WOOD (STRUCTURE, LEGS AND
HANDLES)
Beech and pine are woods only for indoor use. Avoid giving
hard blows and if you deposit some glass that can leave
marks, dry it quickly with a cloth.
• Clean with a cloth dampened in warm water and mild soap
and dry it fast with another cloth.
• Never use abrasive soap or detergent, sandpaper or steel
wool since they could scratch the surface or make colours
fade.
• Never use furniture polish which contains wax, since these
kinds of products tend to leave a sticky layer on the surface
which attracts dust and dirt.
THIS IS A PRODUCT ONLY FOR INDOOR USE.
