TECshow GREY II 8 Manual De Usuario página 4

10. Pan
The pan control sends comtinuosly variable
amounts of the post fader signal to either the left
or right main busses. In the center position equal
amounts of signal are sent to the left and right
busses.
11. Mute
All output from the channel are enabled when the
MUTE switch released and muted when the switch
is down.
12. Channel Fader
This is function to adjust the volume of signal con-
nection in to each channel and adjust the volume of
output, together with master fader. Normal oper-
ation is at the O mark, providing 4dB of gain above
that point, if required.
13. OL (peak level indicator)
A red LED indicates a signal level at the insert return
point, pre master fader, It illuminates at approxi-
mately 5dB below clipping.
14. Solo
This lovable switch allows you to hear signals
through your head phones or control room without
having to route them to the main mix. You dont
even have to have the channels fader turned up.
Folks use solo in live work to preview channels
before they are letin to the mix, or to just check out
what a particular channel is up to any time during a
session. You can solo as many channels at a time as
you like.
P. 4
Tecshow Grey II 8 | English version
10
11
12
13
14