Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Climatizador AM52 Modificado_Maquetación 1 22/10/15 12:05 Página 28
HOW TO USE THE REMOTE CONTROL PANEL:
1. AIRE button: press this button
can change wind bearing 120°.
2. TIMER button: one press increa-
se 0.5 hour, total 7.5 hours, the four
LED indicators always indicate the
timer remained. If the set timer is
reached, the machine automatically
shut off.
3. VELOCIDAD button: Three wind
flow level; "HIGH", "MIDDLE", "LOW"
with three LED indicator.
4. CALOR\MODO button: press this
button to start heating by PTC. but-
ton: Press this button to select
Normal, Natural, Sleep mode
5. FRÍO button: press this button to cooling.
6. ANION button: press this button, then the Anion function is turn on.
7.
Button: can run the machine and stand-by the machine
Note: If the remote control is not going to be used for a long
time, please take out the batteries to avoid corrosion of parts for
leakage of electrolyte from batteries.
CLEAN & REPLACE THE FILTER
The filter is already assembled before delivery from factory, but the
filter
should be cleaned or replaced after a certain time use. It should be
operated by
Technical people or ask for advice by local distributor. The method is
mentioned below.
- 28 -
E
N
G
L
I
S
H
Tabla de contenido
