Receiver Programming - LD Systems LDMEI100G2 Manual De Usuario

RECEIVER PROGRAMMING

Select a GROUP and/or CHANNEL:
Press the SET button (GROUP flashes). The desired frequency group is
selected using the arrow keys
button again (CHANNEL flashes). The desired frequency group is selected
using the arrow keys
5
6
Battery indicator:
The battery status of the receiver is indicated in 5 levels (see Fig.
7
Stereo/mono mode indicator:
The receiver automatically detects whether a stereo or mono signal is
present and indicates the respective status on the LC display (see Figure
8
LC display options:
Battery status, RF/audio level, stereo/mono mode, radio frequency (see
Figure
9
and
8
). Stereo/mono mode is configured on the transmitter.
9
).
SYSTEM SETUp:
5
and (see Figure ). Press the SET
6
(see Figure ). Confirm with SET.
7
).
11