In the next table you can see the most common problems and its solution:
ANOMALY
The equipment
makes noise
The equipment is
operating
continuously
Equipment is
stopped
Equipment loses
water
No water coming out
of the tap
Inadequate flavor
ORIGIN
A) Defective outlet pump
B) Inlet valve semi-blocked
A) Lack of water
B) Inlet valve is closed
C) Membrane saturated
A) Network cable is disconnected
B) Control circuit defective
A) Equipment overflowing
B) O-ring defective
C) Connection defective
A) Tank is empty
B) Sediment filter is blocked
C) Water circuit blocked
D) Outlet pump disconnected or
defective
E) OI membrane blocked
F) Water inlet closed
G) Lack of network pressure
A) Water stored for too long
B) Tank dirty
C) Filters used for too long
A) Contact the authorized technical
service
A) Check general water faucet
B) Contact the authorized technical
service
C) Replace membrane (authorized
technical service)
A) Connect network cable
B) Contact authorized technical
service
A) Check movement of buoy
B) Check closing joint of outlet pump
C) Check connection of inner tubes.
Contact the authorized technical
service.
A) Check network pressure
B) Contact the authorized technical
service
A) Empty the circuit and clean tank,
tubes and tap.
B) Clean the tank
C) Replace filters
D) Change the RO membrane.
Contact the authorized technical
service.
30
SOLUTION