System Installation - Euro Fontanilla ECO BASIC Manual De Instrucciones

4. SYSTEM INSTALLATION

Installation of the unit must be realized by the authorized technical service provider and must adhere to local
country regulations and standards.
Follow the below diagrams carefully.
Step 1
1. Drill through the sink surface area with
a 19mm drill.
Step 4
4. Remove the valve of the sinks tap.
Step 2
2. Insert the tap through the hole.
Step 5
5. Connect the units intake valve
to the water outlet valve of sinks
tap.
24
Step 3
3. Connect the tap with items shown in
the diagram, following the same order.
Step 6
6. Drill a hole into the sinks drainage
pipe using a 7.2mm drill bit.