Tabla de contenido
Zipper Sewing
(Continued)
[] Raise and release foot, and re-attach it on left-hand side
of pin
Take the upper fabric layer and lay it flat over the zipper
Starting just below zipper bottom stop, sew across fabric
to about 3/8" to 1/2" distance from the basting stitch line
Turn fabric 90 ° and sew a seam the entire length of
zipper tape Before reaching pull-tab, stop the machine
with needle in fabric and raise the fool Use seam ripper
to open a few inches of basting stitch, then unzip a few
inches to clear a path for the stitch. At end of seam, sew
in reverse a few stitches to lock
Once both sides of zipper are sewn, use seam ripper to
open the basting stitch,
f
[]
J
44
Tabla de contenido
