Cleaning And Maintenance; Technical Specifications - Perel CFAN0230 Manual Del Usuario

5. Overview
Refer to the illustrations on page 2 of this manual.
6. Operating instructions
Refer to the illustrations on page 2 of this manual.
Note: Never use the fan without the safety grill in place.
• Carefully unpack the fan and remove all shipping materials before operating.
• Place the fan on a flat and sturdy surface. Make sure no objects (e.g. curtains) can be sucked into
the rear of the fan.
• Insert the power plug [7] into the mains.
• Adjust the tilt angle by pushing the grille.
• Set the desired output speed via the control buttons:
0...STOP
• Always switch off the fan before moving it.
• Switch off and unplug from the mains after use.

7. Cleaning and maintenance

• Disconnect the device from the mains prior to maintenance activities.
• Clean out the parts with a soft and dry cloth. Remove stains with a damp cloth and some mild soap.
Remove soap remnants with the damp cloth. Do not use abrasives.
• Make sure no water or any other liquid enters the motor assembly [5] or the control buttons [6].
• Keep the ventilation holes of the motor assembly [5] free from dust at all times.

8. Technical specifications

power
Ø fan
airflow
height
weight
vertical oscillation arc
power supply
max. ambient temp
power cord length
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user manual, please visit our website
www.perel.eu. The information in this manual is subject to change without prior notice.
30.11.2010
CFAN0230 - CFAN0245
1 front grille
2 fan blade
3 rear grille
4 base
1...LOW
speed 1
speed 2
speed 3
5 motor assembly
6 control buttons
7 power cord
2...MEDIUM
CFAN0230
50W
30cm
8.2m/s
9.3m/s
11.1m/s
39cm
3000g
130°
230Vac/50Hz
50°C
1.8m
4
3...HIGH
CFAN0245
130W
45cm
11.1m/s
17.6m/s
19.1m/s
58cm
3000g
©Velleman nv