Main Menu - Pentair ControlPro CPRO-1010 Guia De Instalacion

Main menu

This section explains the main menu. The specific menus for filtration, backwash, heating and settings are explained in
separate sections.
+
Using it is possible to scroll further in the menu. In order to enter a specific menu push
** These menus or screens are only accessible from within the SUPERVISOR menu. (See settings menu)
In this manual they are represented with a lighter background.
This screen displays the main status of the system as well as the symbols
representing the different outputs. The system will return automatically to this
screen.
The filtration menu controls the filtration pump schedule and speed in case of
a multispeed pump. In order to enter this menu push
Co trols the backwashing in order to enter this menu push
n
Controls the heating and solar parameters. If no heating is configured the
menu will not appear. In order to enter this menu push
This menu allows configuration of the system;
In order to enter this menu push
This screen is a graphic representation of the Filtration schedule. Each block
represents 1 hour of filtration.
Displays the effective filtration time since the last backwash; between
brackets is the SET value for next backwash.
Displays the actual pool temperature. Between brackets is the heating SET
temperature. This value will alternate with the solar temperature (if activated)
Displays date, time and actual pool temperature
**Displays effective filtration time within a specified program. In this example
3:05 of 12:00 hours of filtration done.
**Displays the firmware version of the Display alternating with the firmware
version on the Interface module
ENT
ENT
ENT
ENT
ENT
.
13