SEVERIN MW 7803 Instrucciones De Uso página 23

Combination functions
When using the combination functions, the microwave, hot/air and grill functions are activated alternately at different time settings.
Using the various combinations helps to reduce the overall cooking time. These programmes are useful for fi sh, potatoes, souffl és or
cooking 'au gratin'.
Function
Combi 1
Combi 2
Combi 3
Combi 4
1. Press . 140°C starts fl ashing on the display, and the symbol
2. Use the keys and
the corresponding symbol (
3. Press to confi rm the selected combination.
4. Use the keys and
5. Press to start the cooking process. The corresponding symbol for the selected function fl ashes on the display.
Defrost programme according to time or weight (
This defrosting programme is useful for defrosting food by either setting the weight of the food to be defrosted, or by directly setting
the defrosting time. For delicate food we recommend defrosting on the level 'Low' (see table Power setting), to ensure that the food is
defrosted with an even, low temperature setting.
The indicator 'd-1' represents weight-based defrosting; 'd-2' represents time-based defrosting.
Helpful notes:
∙ The defrosting process should be interrupted at regular intervals and those food portions already defrosted should be taken out;
this is to ensure that food already defrosted will not take away heat from food that still requires defrosting.
∙ Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is advisable to limit any further
defrosting times to 1-minute periods until the food is fully defrosted.
∙ Food stored in plastic containers or wrapped in plastic should be left standing for a while after it has been taken from the freezer.
Wait until the food can be easily detached from the plastic, before it is put into the oven inside a container suitable for use with
microwave ovens.
1. Press once or twice. The display shows 'd-1' or 'd-2' and, in addition, the symbols
2. Use the keys and
time (between 00:05 and 95:00).
3. Press to start the defrosting process. An acoustic signal is heard, and the symbols
Re-heating function
The re-heating function is useful for heating up ready-cooked meals. For programming, it is suffi cient to indicate the type of food and
the weight.
Type of food
h-1
Re-heating
Display Microwave
C-1
C-2
C-3
C-4
to set the required combination functions. The indicator 'C-1', 'C-2', 'C-3' or 'C-4' starts fl ashing, and
, or , or ) appears.
to set the required cooking time.
)
to set the weight of the food to be defrosted (between 100 g and 2000 g) or the desired defrosting
Grill
l
l
l
appears.
Weight
150 g
250 g
350 g
450 g
600 g
l
l
l
and .
and start fl ashing.
Display
150
250
350
450
600
Hot air
l
l
l
23