SEVERIN EM 3965 Instrucciones De Uso página 8

as the
- staff kitchens in shops, offi ces and
other similar working environments,
- agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
∙ The appliance may only be used
by persons with reduced physical,
sensory or mental capabilities, or
lacking experience and knowledge,
if they have been given supervision
or instruction concerning the use of
the appliance and fully understand
all dangers and safety precautions
involved.
∙ Children must not be permitted to
operate the appliance. The appliance
and its power cord must be kept well
away from children.
∙ Children must not be permitted to
play with the appliance.
∙ Caution: Keep any packaging materials
well away from children – these materials
are a potential source of danger, e.g. of
suffocation.
∙ Every time the appliance is used, the
main body including the power cord as
well as any attachment fi tted should
be checked thoroughly for any defects.
8
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull the
power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
∙ Caution: After switching the appliance
off, always remove the plug from the wall
socket and wait until the blades have
come to a complete standstill before
removing them from the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself. Do not allow
the power cord to hang free.
∙ Do not leave the appliance unattended
while in use.
∙ Caution: Do not touch any moving parts
during operation - this can be extremely
dangerous
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Operation
Intended application
This appliance can be used for cutting or
slicing cakes, boneless meat, vegetables or
similar sliceable foods.
Cutting blades
∙ Position the cutting blades parallel to
each other and connect them by inserting
the metal pin on one of the blades into the
corresponding slot of the second blade.
Lift up the blades by using the fi nger
guard and insert them into the housing of
the drive unit until they audibly lock into
place.